USB Explorer 280多功能USB 3.0協議分析儀

Ellisys USB Explorer 280 Protocol Analyzer 可測試及分析 USB 3.0 Super Speed, 內建 4GB FIFO內存可支援 USB 3.0 5GT/s 之協議分析.

生產廠商： ELLISYS公司 產品型號： USB Explorer 280
產品簡介： Ellisys USB Explorer 280 Protocol Analyzer 可測試及分析 USB 3.0 Super Speed, 內建 4GB FIFO內存可支援 USB 3.0 5GT/s 之協議分析.

售價：￥289000

Ellisys USB Explorer 280 Multifunction USB 3.0 Protocol Analyzer

Ellisys USB Explorer 280 Protocol Analyzer可測試及分析

USB 3.0 Super Speed,內建4GB FIFO內存可支援USB 3.0 5GT/s之協議分析.

USB Explorer 280是在一個成熟的Ellisys USB分析儀基礎上發展來的，它提供了一個高效的設計環境，包括：一個內置4GB內存,、可靈活配置的硬件和一個為分析測試USB 3.0 5GT/s 高速模式量身定制的處理器,。通過設置，每個USB Explorer 280的硬件單元都可以成為一個協議分析儀或信號發生器,。可分析USB3.0(超高速)和USB2.0(高速,、全速、低速),。

1. Analyze USB 3.0 (SuperSpeed) and USB 2.0 links

2. (High Speed, Full Speed, Low Speed)

3. Emulate USB hosts and devices

4. Automatically detect link speed and SS receivers.

5. Upload and display live data during recording

6. Record LFPS states and display state transitions

Connect to differential SMA for alternative front-end probing during prototype stages

The USB Explorer 280 builds on a successful legacy of Ellisys USB analyzer and generator products, and delivers a superior design efficiency that includes an embedded 4GB of memory, configuration-flexible hardware, and a custom-made processor with the power needed to test and analyze the USB 3.0 5GT/s SuperSpeed mode. Each Ellisys USB Explorer 280 hardware unit is capable of acting as either a protocol analyzer or packet generator, depending on the configuration

Specifcations

Analyzer Characteristics
Supported specifications: USB 3.0, USB 2.0, and USB 1.x Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s Timestamp accuracy: 8ns for USB 3.0, and 16.7ns for USB 2.0/1.x Low-level error detection: CRC-5, CRC-16, CRC-32, state transition errors, invalid PID, framing errors, frame sequence errors, length errors Bus states: detection of SuperSpeed link operating states and all USB 2.0/1.x electrical bus state

Generator Characteristics
Supported specifications: USB 3.0, USB 2.0, and USB 1.x Supported link speeds: 5GT/s, 480Mb/s, 12Mb/s and 1.5Mb/s Supported modes: host or device emulation Timing: 8ns for USB 3.0, and 16.7ns for USB 2.0/1.x

Embedded Memory
4 GBytes of FIFO Memory Data is stored in highly optimized format Analyzed data is uploaded in real time through a USB connection

Front-panel Connectors
Link under test: USB 3.0 STD-A and STD-B 8 SMA (early configurations as alternative front-end connection for SuperSpeed)

Rear-panels Connectors
Computer interface: USB STD-B Auxiliary equipment: supports connection of extension boards SMA trigger: in and out, 50 Ω, max 5VDC Inter-equipment: in and out, supports connection of several units together Power: Max 25W

Power Supply

北京迪陽世紀科技有限責任公司版權所有 ? 2008 - 2018 著作權聲明
010-62156134 62169728 13301007825 節假日:13901042484 微信號:sun62169728
地址：北京市西城阜外百萬莊扣鐘北里7號公寓
E_mail:[email protected] 傳真: 010-68328400
京ICP備17023194號-1 公備110108007750